Honeywell p168 keypad programming manual

honeywell p168 keypad programming manual

Wählen Sie aus, welches Problem mit dem Inhalt besteht.
Vielen Dank für Ihr Feedback.Refer to the control panel's programming guide for the complete list of programming commands and explanations.Refer to the user guide included with the keypad for details on using menu-based user code programming.Assigning the Installer code, enabling the Auto-Stay feature, programming zone attributes.Goes to the previous field.Advance to the next page.Timing Miscellaneous Options (exit/entry delays, alarm sounder timeout, fire alarm sound timeout, installer 4 code, auto-stay enable) 5 Zone Number (prompt to begin zone programming) Zone Programming (zone type, report enable, partition, input type, serial number, response time, hardwire type, 6 zone descriptor) 7 Quit.Once installed, to enable 1996 honda civic manual window regulator the 6160 keypad, start by setting the address at the keypad.Each keypad must be assigned a unique address.Mode Programming section for details.Sexueller Missbrauch von Kindern.The main keypad address should be addressed.Vista 20P Programming Guide Manuals and user guide free PDF.
Keypads programmed with the same address will provide unpredictable results.
Use data field *57 to program the 4 function keys on the right hand side known as A, B, C and.

Unpassenden Inhalt melden, wählen Sie eine der folgenden Optionen aus.Nicht relevant, anstößig, nicht jugendfrei.All require either a 6160, 6160rf or 6160V keypad for programming and setup.Menu mode programming provides easy programming of the following options: Entry of accounts and phone numbers.The 6160 keypad has a 32 character display screen which features English status messages.Or power up the keypad and within 50 seconds of powering up, press the star key and the pound key at the same time, this method needs to be used if 98 was used to exit program mode.
The word "communicating" appears briefly, then the first page of programming options appears.
Enter panel programming mode (installer code 800).

To enter menu mode programming:.
Advance to the next field.
Use data fields to enable keypad addresses, assign a partition, and enable sound options.